3D Fila
Nylon
PA1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 260–300 °C |
| Bed | 90–120 °C |
| Speed | 100–300 mm/s |
| Fan | 0 % |
| Drying (temp / time) | — |
| Density | 1.067 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 61.732MPa |
|---|---|
| Tensile modulus | 360.386MPa |
| Elongation at break | 17.325% |
| Flexural strength | 85.486MPa |
| Impact strength | 11.806/2.184XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | 82.1 °C |
| VICAT | 118.2°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.