3D4Makers
Luvocom 3F PPS-CF 9938 BK
Requires enclosureRequires hardened nozzle
Print parameters
| Diameter | 2.85 mm |
|---|---|
| Nozzle | 310–340 °C |
| Bed | 80–100 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 120 °C / 6 h |
| Density | 1.51 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 120MPa |
|---|---|
| Tensile modulus | 11000MPa |
| Elongation at break | 1.6% |
| Flexural strength | 170MPa |
| Impact strength | 22kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.