3D4Makers
PETG Carbon
Requires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 240–280 °C |
| Bed | 70–80 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 65 °C / 6 h |
| Density | 1.317 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 52.9MPa |
|---|---|
| Tensile modulus | 4015MPa |
| Elongation at break | 3.4% |
| Flexural strength | –MPa |
| Impact strength | 4.03kJ/m² |
| Hardness | 76D Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | 76 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.