3DJAKE
ecoPLA CF
PLA-CF1.75 mm
Requires hardened nozzle
Composition / filler: PLA + carbon fiber
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 210–240 °C |
| Bed | 20–60 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.26 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 55MPa |
|---|---|
| Tensile modulus | 4300MPa |
| Elongation at break | 3.5% |
| Flexural strength | –MPa |
| Impact strength | 5kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.