3DJAKE
ecoPLA Silk
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 210–230 °C |
| Bed | 35–60 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.224 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 39.928MPa |
|---|---|
| Tensile modulus | 411.583MPa |
| Elongation at break | 44.554% |
| Flexural strength | –MPa |
| Impact strength | 3.309kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.