3DXTech
3DXLabs EMI-ABS
ABS1.75 mm
Requires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 285 °C |
| Bed | 100 °C |
| Speed | ≤ 100 mm/s |
| Fan | — |
| Drying (temp / time) | 80 °C / 4 h |
| Density | 1.4 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 30.5/9.5XY/ZMPa |
|---|---|
| Tensile modulus | 2586/1703XY/ZMPa |
| Elongation at break | –% |
| Flexural strength | 55.9MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | 110 °C |
| VICAT | –°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.