3DXTech
3DXPro Low Gloss PETG
PETG1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 255 °C |
| Bed | 70 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.28 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 47MPa |
|---|---|
| Tensile modulus | 1400MPa |
| Elongation at break | 8% |
| Flexural strength | 75MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 70°C |
| Glass transition (Tg) | 80 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.