3DXTech
Obsidian FR-Nylon
PA1.75 mm
Requires enclosureRequires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 265–285 °C |
| Bed | 90–110 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 70 °C / 6 h |
| Density | 1.2 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 30.4/19XY/ZMPa |
|---|---|
| Tensile modulus | 1480/1495XY/ZMPa |
| Elongation at break | 17.7/7.3XY/Z% |
| Flexural strength | 48.4MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.