3DXTech
ThermaX MTS1 Break-away Support
Other1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 290–320 °C |
| Bed | 90–110 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 80 °C / 4 h |
| Density | 1.1 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | –% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | 128 °C |
| VICAT | –°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.