add:north
HT-PLA Pro Matte
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 205–230 °C |
| Bed | 70–75 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 45 °C / 3 h |
| Density | 1.4 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 34MPa |
|---|---|
| Tensile modulus | 4500MPa |
| Elongation at break | 5% |
| Flexural strength | 79MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | 60 °C |
| VICAT | –°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.