add:north
Koltron G1
Print parameters
| Diameter | 2.85 mm |
|---|---|
| Nozzle | 285–295 °C |
| Bed | 55–65 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 60 °C / 4 h |
| Density | 1.8 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 51MPa |
|---|---|
| Tensile modulus | 562MPa |
| Elongation at break | 50% |
| Flexural strength | 89MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 100°C |
| Glass transition (Tg) | -34 °C |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.