add:north
PC Blend HT LCF
PC-CF1.75 mm
Requires enclosureRequires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 265–290 °C |
| Bed | 100–120 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 50 °C / 3 h |
| Density | 1.3 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 125MPa |
|---|---|
| Tensile modulus | 9800MPa |
| Elongation at break | 2.9% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | 158 °C |
| VICAT | –°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.