add:north
Rigid X
Requires hardened nozzle
Print parameters
| Diameter | 2.85 mm |
|---|---|
| Nozzle | 260–270 °C |
| Bed | 65–75 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 70 °C / 6 h |
| Density | 1.32 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 52MPa |
|---|---|
| Tensile modulus | 5120MPa |
| Elongation at break | 8% |
| Flexural strength | 89MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 82°C |
| Glass transition (Tg) | 80 °C |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.