Alzament
ASA
ASA1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 240–270 °C |
| Bed | 80–100 °C |
| Speed | ≤ 250 mm/s |
| Fan | 0–80 % |
| Drying (temp / time) | 80 °C / 8 h |
| Density | 1.05 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 37/31XY/ZMPa |
|---|---|
| Tensile modulus | 2450/2120XY/ZMPa |
| Elongation at break | 9.2/4.6XY/Z% |
| Flexural strength | 65/40XY/ZMPa |
| Impact strength | 19.6/–XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 92°C |
| Glass transition (Tg) | — |
| VICAT | 106°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.