Alzament
PETG
PETG1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 230–240 °C |
| Bed | 70–80 °C |
| Speed | 30–50 mm/s |
| Fan | 0–20 % |
| Drying (temp / time) | — |
| Density | 1.25 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 50.8/42.8XY/ZMPa |
|---|---|
| Tensile modulus | 2116.78/1898.7XY/ZMPa |
| Elongation at break | 8.4/3.3XY/Z% |
| Flexural strength | 69.6/–XY/ZMPa |
| Impact strength | 2.6/–XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.