Alzament
PLA Basic
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 190–220 °C |
| Bed | 45–60 °C |
| Speed | 50–100 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.24 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 35/31XY/ZMPa |
|---|---|
| Tensile modulus | 2580/2060XY/ZMPa |
| Elongation at break | 6.3/1.8XY/Z% |
| Flexural strength | 76/59XY/ZMPa |
| Impact strength | 3.3/–XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.