American Filament
Tough Pro PLA+
PLA1.75 mm
Composition / filler: NatureWorks Ingeo 3D870 PLA
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 205–220 °C |
| Bed | 45–60 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.22 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 40/24XY/ZMPa |
|---|---|
| Tensile modulus | 2865/2477XY/ZMPa |
| Elongation at break | –% |
| Flexural strength | 73/46XY/ZMPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 80°C |
| Glass transition (Tg) | 57.5 °C |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.