Anycubic
PC
PC1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 270–290 °C |
| Bed | 100–120 °C |
| Speed | 20–250 mm/s |
| Fan | 90 % |
| Drying (temp / time) | 80 °C / 8 h |
| Density | 1.2 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 65MPa |
|---|---|
| Tensile modulus | 2550MPa |
| Elongation at break | 9% |
| Flexural strength | 105MPa |
| Impact strength | 30kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 110°C |
| Glass transition (Tg) | — |
| VICAT | 122°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.