Anycubic
PET-CF
PET-CF1.75 mm
Requires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 260–290 °C |
| Bed | 80–100 °C |
| Speed | 40–200 mm/s |
| Fan | 30 % |
| Drying (temp / time) | 80 °C / 8 h |
| Density | 1.3 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 115/28XY/ZMPa |
|---|---|
| Tensile modulus | 8700/–XY/ZMPa |
| Elongation at break | 5/–XY/Z% |
| Flexural strength | 188/–XY/ZMPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | 231°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.