Anycubic
PLA-CF
PLA-CF1.75 mm
Requires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 210–250 °C |
| Bed | 55–70 °C |
| Speed | 40–250 mm/s |
| Fan | 100 % |
| Drying (temp / time) | 53 °C / 7 h |
| Density | 1.22 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 44MPa |
|---|---|
| Tensile modulus | 3100MPa |
| Elongation at break | 10.5% |
| Flexural strength | 74MPa |
| Impact strength | 25kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 60°C |
| Glass transition (Tg) | — |
| VICAT | 69°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.