Anycubic
PLA Matte
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 190–230 °C |
| Bed | 55–65 °C |
| Speed | 30–200 mm/s |
| Fan | 100 % |
| Drying (temp / time) | 55 °C / 6 h |
| Density | 1.31 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 23/12XY/ZMPa |
|---|---|
| Tensile modulus | 2000/–XY/ZMPa |
| Elongation at break | 28/–XY/Z% |
| Flexural strength | 40/–XY/ZMPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | 64 °C |
| VICAT | 62.7°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.