Anycubic
PLA Silk
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 210–240 °C |
| Bed | 55–65 °C |
| Speed | 50–250 mm/s |
| Fan | 100 % |
| Drying (temp / time) | 55 °C / 6 h |
| Density | 1.22 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 37/12XY/ZMPa |
|---|---|
| Tensile modulus | 2000/–XY/ZMPa |
| Elongation at break | 28/–XY/Z% |
| Flexural strength | 66/–XY/ZMPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | 55.6 °C |
| VICAT | 54°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.