Azure Film
PC/ABS
PC1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 260–280 °C |
| Bed | 100–110 °C |
| Speed | ≤ 350 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.04 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 41.4MPa |
|---|---|
| Tensile modulus | 2000MPa |
| Elongation at break | –% |
| Flexural strength | 65.7MPa |
| Impact strength | 25kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 120°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.