Azure Film
PLA Matte HS
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 205–225 °C |
| Bed | 60 °C |
| Speed | 300–500 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.35 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 42.8MPa |
|---|---|
| Tensile modulus | 3800MPa |
| Elongation at break | –% |
| Flexural strength | 81.8MPa |
| Impact strength | 6kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 55°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.