Azure Film
PLA Strongman
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 200–230 °C |
| Bed | 50–60 °C |
| Speed | 50–100 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | — |
Mechanical & thermal properties
| Tensile strength | 41.2MPa |
|---|---|
| Tensile modulus | 2900MPa |
| Elongation at break | 8.9% |
| Flexural strength | 52.3MPa |
| Impact strength | 21.8kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.