Bambu Lab
PLA Tough+
PLA
Print parameters
| Nozzle | 220–250 °C |
|---|---|
| Bed | 35–65 °C |
| Speed | ≤ 300 mm/s |
| Fan | — |
| Drying (temp / time) | 55 °C / 8 h |
| Density | 1.21 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 34.9/20.9XY/ZMPa |
|---|---|
| Tensile modulus | 1860/1920XY/ZMPa |
| Elongation at break | 9.4/9.3XY/Z% |
| Flexural strength | 65/54XY/ZMPa |
| Impact strength | 72.3/18.6XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 58°C |
| Glass transition (Tg) | 61 °C |
| VICAT | 62°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.