BCN3D
Omega Impact ABS
ABS1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 260 °C |
| Bed | 85–95 °C |
| Speed | 20–50 mm/s |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.035 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 35.3MPa |
|---|---|
| Tensile modulus | 1.484MPa |
| Elongation at break | 9.8% |
| Flexural strength | 43.6MPa |
| Impact strength | 24.7kJ/m² |
| Hardness | 70D Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | 107 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.