BCN3D
Omega Resistant Nylon
PA1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 250–270 °C |
| Bed | 85–100 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.27 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 56MPa |
|---|---|
| Tensile modulus | 2.3MPa |
| Elongation at break | 6.1% |
| Flexural strength | 90MPa |
| Impact strength | 4.35kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 69°C |
| Glass transition (Tg) | 81 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.