Coex3D
Carbon Filled PLA (PLA-CF)
PLA-CF1.75 mm
Requires hardened nozzle
Composition / filler: carbon fiber
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 215–235 °C |
| Bed | 60 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 55 °C / 3 h |
| Density | 1.24 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 53MPa |
|---|---|
| Tensile modulus | 3600MPa |
| Elongation at break | 6% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 55°C |
| Glass transition (Tg) | 57.5 °C |
| VICAT | –°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.