colorFabb
ASA
ASA1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 240–260 °C |
| Bed | 90–100 °C |
| Speed | 30–50 mm/s |
| Fan | 0–50 % |
| Drying (temp / time) | — |
| Density | 1.07 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 45MPa |
|---|---|
| Tensile modulus | 2100MPa |
| Elongation at break | 6.5% |
| Flexural strength | –MPa |
| Impact strength | 10.5kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 87°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.