colorFabb
nGen
PETG1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 220–240 °C |
| Bed | 75–85 °C |
| Speed | 40–70 mm/s |
| Fan | 75 % |
| Drying (temp / time) | — |
| Density | 1.2 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 54MPa |
|---|---|
| Tensile modulus | 1700MPa |
| Elongation at break | –% |
| Flexural strength | –MPa |
| Impact strength | 3.3kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 71°C |
| Glass transition (Tg) | 85 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.