colorFabb
PLA High Speed Pro
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 215–225 °C |
| Bed | 50–60 °C |
| Speed | — |
| Fan | 100 % |
| Drying (temp / time) | — |
| Density | 1.21 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 43.7MPa |
|---|---|
| Tensile modulus | 2630MPa |
| Elongation at break | 5.7% |
| Flexural strength | 71MPa |
| Impact strength | 27.9kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 57°C |
| Glass transition (Tg) | 20 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.