colorFabb
stoneFill
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 195–220 °C |
| Bed | 50–60 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | — |
| Density | — |
Mechanical & thermal properties
| Tensile strength | 45MPa |
|---|---|
| Tensile modulus | 3325MPa |
| Elongation at break | 3.7% |
| Flexural strength | 80MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.