colorFabb
Varioshore TPU
TPU1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 210–250 °C |
| Bed | 40–60 °C |
| Speed | 50–60 mm/s |
| Fan | 100 % |
| Drying (temp / time) | — |
| Density | 1.2 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 24MPa |
|---|---|
| Tensile modulus | 50MPa |
| Elongation at break | 465% |
| Flexural strength | 3MPa |
| Impact strength | 40kJ/m² |
| Hardness | 92A Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | 20 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.