CREAMELT
rPET fifty
PETG1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 255–265 °C |
| Bed | 80–90 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 100 °C / 5 h |
| Density | 1.15 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 49MPa |
|---|---|
| Tensile modulus | 1650MPa |
| Elongation at break | 3% |
| Flexural strength | –MPa |
| Impact strength | 115kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | 78 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.