Elegoo
Rapid PLA Plus
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 200–230 °C |
| Bed | 35–65 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 50 °C / 8 h |
| Density | 1.23 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 39MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 8.5% |
| Flexural strength | 71MPa |
| Impact strength | 50.4kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 57°C |
| Glass transition (Tg) | — |
| VICAT | 62°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.