ERYONE
PETG-CF
PETG-CF1.75 mm
Requires hardened nozzle
Composition / filler: carbon fiber
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 230–250 °C |
| Bed | 75–80 °C |
| Speed | 30–80 mm/s |
| Fan | — |
| Drying (temp / time) | 80 °C / 12 h |
| Density | 1.25 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 48.7/24.1XY/ZMPa |
|---|---|
| Tensile modulus | 1768.6/1700.3XY/ZMPa |
| Elongation at break | 1.9/1.5XY/Z% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 68°C |
| Glass transition (Tg) | 68 °C |
| VICAT | 85°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.