ERYONE
Silk Dual-Color PLA
PLA1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 190–220 °C |
| Bed | 55–70 °C |
| Speed | 30–100 mm/s |
| Fan | — |
| Drying (temp / time) | 55 °C / 8 h |
| Density | 1.32 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 49.8/11XY/ZMPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 1.7/–XY/Z% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 53°C |
| Glass transition (Tg) | 63 °C |
| VICAT | 56°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.