eSUN
PC HT
PC1.75 mm
Requires enclosure
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 280–310 °C |
| Bed | 100–110 °C |
| Speed | ≤ 300 mm/s |
| Fan | 20 % |
| Drying (temp / time) | 100 °C / 6 h |
| Density | 1.23 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 67.6/50.6XY/ZMPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 7.3/4.9XY/Z% |
| Flexural strength | 97.2/76.3XY/ZMPa |
| Impact strength | 13.6/2.4XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.