eSUN
PET Basic
PET1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 250–280 °C |
| Bed | 70–90 °C |
| Speed | ≤ 250 mm/s |
| Fan | 40–70 % |
| Drying (temp / time) | 60 °C / 8 h |
| Density | 1.28 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 50.1/30.92XY/ZMPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 3.62/2.59XY/Z% |
| Flexural strength | 102.8/99.1XY/ZMPa |
| Impact strength | 2.12/2.07XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 70°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.