eSUN
PET CF
PET-CF1.75 mm
Requires hardened nozzle
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 250–320 °C |
| Bed | 70–120 °C |
| Speed | ≤ 200 mm/s |
| Fan | 0–20 % |
| Drying (temp / time) | 90 °C / 6 h |
| Density | 1.42 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 80.32/22XY/ZMPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 3.61/2.11XY/Z% |
| Flexural strength | 135.6/33.4XY/ZMPa |
| Impact strength | 7.16/2.12XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 75°C |
| Glass transition (Tg) | 70 °C |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.