eSUN
PET FR
PET1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 300–320 °C |
| Bed | 70 °C |
| Speed | ≤ 200 mm/s |
| Fan | — |
| Drying (temp / time) | 110 °C / 5 h |
| Density | 1.52 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 47.66/20XY/ZMPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 3.94/2.38XY/Z% |
| Flexural strength | 76.4/26.8XY/ZMPa |
| Impact strength | 5.99/2.2XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 75/–XY/Z°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.