Extrudr
GreenTEC Pro CF
PLA-CF1.75 mm
Requires hardened nozzle
Composition / filler: carbon fiber
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 225–250 °C |
| Bed | 20–90 °C |
| Speed | 20–200 mm/s |
| Fan | 20–50 % |
| Drying (temp / time) | — |
| Density | 1.2 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 65MPa |
|---|---|
| Tensile modulus | 7120MPa |
| Elongation at break | 2.5% |
| Flexural strength | –MPa |
| Impact strength | 4.6kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 115°C |
| Glass transition (Tg) | — |
| VICAT | 165°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.