Fiberlogy
ABS GF
ABS-GF1.75 mm
Requires enclosureRequires hardened nozzle
Composition / filler: glass fiber
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 270–295 °C |
| Bed | 90 °C |
| Speed | — |
| Fan | 10–30 % |
| Drying (temp / time) | 60 °C / 4 h |
| Density | 1.12 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 50MPa |
|---|---|
| Tensile modulus | 3500MPa |
| Elongation at break | 3.5% |
| Flexural strength | 70MPa |
| Impact strength | 10kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 80°C |
| Glass transition (Tg) | — |
| VICAT | 95°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.