Fiberlogy
rPETG
PETG1.75 mm
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 220–250 °C |
| Bed | 90 °C |
| Speed | — |
| Fan | 0–25 % |
| Drying (temp / time) | 60 °C / 4 h |
| Density | 1.29 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 51MPa |
|---|---|
| Tensile modulus | 2800MPa |
| Elongation at break | 29% |
| Flexural strength | 70MPa |
| Impact strength | 5kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 62°C |
| Glass transition (Tg) | — |
| VICAT | 78°C |
Manufacturer data
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.