Fiberthree
PA ESD
PA-CF
Requires enclosureRequires hardened nozzle
Composition / filler: carbon fiber + conductive particles
Print parameters
| Nozzle | 280–310 °C |
|---|---|
| Bed | 0 °C |
| Speed | 50 mm/s |
| Fan | 0 % |
| Drying (temp / time) | — |
| Density | 1.2 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 105MPa |
|---|---|
| Tensile modulus | 12200MPa |
| Elongation at break | 2.3% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 120°C |
| Glass transition (Tg) | 70 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.