Fiberthree
PA-GF30 Pro
PA-GF1.75 mm
Requires enclosureRequires hardened nozzle
Composition / filler: glass fiber (30 %)
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 270–285 °C |
| Bed | ≤ 80 °C |
| Speed | 50 mm/s |
| Fan | 0 % |
| Drying (temp / time) | — |
| Density | 1.35 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 106MPa |
|---|---|
| Tensile modulus | 8070MPa |
| Elongation at break | 2% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 90°C |
| Glass transition (Tg) | 65 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.