Fiberthree
PP-GF25
PP-GF
Requires hardened nozzle
Composition / filler: glass fiber (25 %)
Print parameters
| Nozzle | 230 °C |
|---|---|
| Bed | 80 °C |
| Speed | 50 mm/s |
| Fan | 50–100 % |
| Drying (temp / time) | — |
| Density | 1.09 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 25MPa |
|---|---|
| Tensile modulus | 2442MPa |
| Elongation at break | 4% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.