Filament PM
PETG-CFJet
PETG-CF1.75 mm
Requires hardened nozzle
Composition / filler: PETG + 17% karbonových vláken
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 220–250 °C |
| Bed | 80–90 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.27 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | –% |
| Flexural strength | –MPa |
| Impact strength | 23kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 70°C |
| Glass transition (Tg) | — |
| VICAT | 85°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.