Filament PM
PLA
Composition / filler: polylactic acid - vyroben z kukuřičného škrobu
Print parameters
| Diameter | 1.75 mm |
|---|---|
| Nozzle | 200–220 °C |
| Bed | 20–60 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | — |
| Density | 1.24 g/cm³ |
Mechanical & thermal properties
| Tensile strength | –MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | –% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | 78.3D Shore |
| HDT (heat deflection) | 55°C |
| Glass transition (Tg) | — |
| VICAT | 55°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.